The Fralien, or Framed Staple Alien has the benefits of both an Alien coil and a ribbon based coil such as the Framed Staple Fused Clapton offering unbeatable juice reservoirs and a beautifully warm, dense vape.
Please view the video reviews below and read our customer reviews at the bottom of the page.
Nichrome 80 (N80), Stainless Steel (SS316L) and Kanthal A-1 (KA-1) core and wrap wire available! Please state in the custom field above if you'd like a different metal type. Values below are for N80 only.
Sold in a set which contains 2 coils (pair)
Ultrasonically cleaned in our state of the art stainless steel 6L ultrasonic cleaner on a 30 minute cycle with deionised (DI) water and then only handled using ceramic tweezers ensuring no one touches your coil until it is in your hands
Pre-fire service available included in the price. Don't have a device that fires below 0.1 Ω? Add a comment in the checkout for us to pre-fire for you! We won't snip the leads (legs) so all you'll need to do is install, pulse (ohms will now be higher) to work out any new hotspots caused by the installation, ensure the coils are heating from the center outward and simply wick and vape! Ultrasonically cleaned before and after to ensure crisp, clean coils
First time install not yet fired. These values change after several pulses. Once the wire settles down, the Ω value will go up and settle at our estimated range.
5 wrap / 2.5mm ID:
Single coil: 0.16 Ω
Dual coil: 0.08 Ω
5 wrap / 3mm ID:
Single coil: 0.17 Ω
Dual coil: 0.09 Ω
Once pulsed, hot spots worked out with even glow from center outward
5 wrap / 2.5mm ID:
Single coil: 0.23 Ω
Dual coil: 0.11 Ω
5 wrap / 3mm ID:
Single coil: 0.25 Ω
Dual coil: 0.12 Ω
Ohm estimates are based on a 10mm lead (leg) length. Install further from the deck posts for a slightly higher ohm value
Ensure your device can fire below 0.1 Ω, otherwise install one coil at a time to pulse (fire) the coil
Due to the ribbon wire used within this coil, it creates a distinct flat look unlike any other coil out there. Juice sits within this ribbon creating a secondary reservoir on top of the already amazing holding properties of the fused Alien wrap, creating unbelievably luscious flavour and bountiful vapour production.
Made using the very best wire; Twisted Messes and Kidney Puncher.
You will receive a set of two coils inside glass vials with a free sample of the fantastic Cotton Junkie by Wick Addiction. Both coils and vials are ultrasonically cleaned multiple times and handled using ceramic tweezers ensuring no one touches your coils until you have them in your own hands!
Note: Resistance can vary depending on leg length between the coil and terminals.
These coils may initially fire below 0.1Ω due to the resistance of the wire so please ensure either your regulated device fires below 0.1Ω or you pre-fire on a mechanical device to raise the ohms and finish working out hot spots on a regulated device. We recommend firing if possible on a DNA device, or a device that can fire as low as 0.05Ω.
Please ensure you are using high amperage cells such as authentic Sony VTC4, 5 or 6's.
Please note, installing these types of coils are different from regular wire. Pulse very slowly on a low wattage at first as they will have many hot spots until all of the wire settles down due to how intricate the coils are. Strum and grip the coils with ceramic tweezers until the hot spots are all gone and the coils are heating up from the centre outward.
For coil maintenance, once the coil has started to ‘gunk’ up due to thesuclarosein your e-juice (While our coils will last longer than others, gunk build up is unavoidable due to some juice brands opting for heavy amounts ofsuclarosein their juice lines), we recommend putting yourattyon a regulated device (Preferably one you do not use often), setting the wattage to around 50-60w and ‘pulsing’ them with no cotton until they heat up a dark orange, stopping the pulsing and quickly ‘dip’ the coils under a warm tap while the coils are still hot ensuring the tap is a very weak stream of water as to not accidentally leak water on your regulated device. ‘Dip’ the coils around 3 times and you should see them look almost as new as you got them! Leave to dry, re-wick and enjoy fullflavouragain!
Advanced users only! Interstellar Vaping is not responsible for any harm or damage caused by using any of our products and due care and attention is required at all times. If you do not understand Ohms Law, battery safety and the safe max amperage of your cells please do not use these coils. If you wish to learn more about this before using, please consult battery ‘Mooch’s data sheets on the safe amperage of your cells using his battery ratings table of your corresponding cells and purchase the corresponding ohm coils. Steam Engine is also a fantastic collection of calculators to determine the amps draw of these coils. Please use two cell regulated devices with these coils to share the amperage draw.